Saw the matrix is not easy recycling and secondary use

Welded diamond saw blade to use more high-frequency welding welder heating. It is characterized by welding low cost, but less than that is not easy to weld quality assurance, saw the matrix deformation, for 30 0mm below the thin blade deformation greater, and thus directly affect the normal use of the saw blade. To change this situation,  abrasive wheels  with the use of laser welding, although able to meet the quality requirements, but the cost is high, one-time capital investment; also saw the matrix is not easy  Diamond blade  and secondary use. Thus, it is difficult to be widely used in small and medium factories. To this end, developed tooth saw blade  abrasive grinding  plating method can effectively solve the above problems. This method is the key question is: first processing of qualified diamond composite teeth; then saw the matrix circumferential direction of the diameter of the groove milled certain specifications, the composite teeth into the trench, and then apply the composite plating method to form teeth inlaid prison diamond saw.